How to Apply a Human Hair Lace Wig- 10 Steps to Your Glamour Look

A lot of people often have questions on how to put on a wig or how to make it look natural. Although some think only a stylist can apply wigs properly, it is also possible to apply your wig yourself and achieve a great natural look.

Human hair lace wigs are some of the most versatile hair enhancements. Whether you have long, short, or no hair, a wig can instantly enhance your looks and add some glamour to your appearance.

If you have natural hair, you may use a wig instead of having to color, straighten, or stress your strands hair. Even more, human hair wigs last longer than synthetic wigs and look more natural.

This post will guide you on how to put on your human hair wigs and create a natural look step by step without visiting a stylist, saving you some cost, and the stress of going to the salon.Before we go into the detailed guideline of how to install your lace wig like a stylist, here is a quick highlight of the steps you need to take when applying your wig, keep it securely in place, and achieve the breezy natural look.

1. Pack your wig up into a ponytail to avoid the edges sticking to the glue. Use bobby pins to hold the hairs in the tips if it’s a short wig.

2. Test fit the wig and trim the extra lace on the edges. This is only applicable if the wig is new, and the laces haven’t been trimmed already by the manufacturer.

3. Braid your hair into cornrows to help hide it under the wig and avoid bumps. You can pack long hair into a ponytail and then lay it flat using bobby pins.

4. Clean the skin on your hairline to remove oil and dirt. You can use soap and water or dab with alcohol.

5. Spray your hairline with a scalp protector to prevent direct contact between your skin and the glue.

6. Put on your wig cap to further flatten your hair further and keep the wig in place.

7. Use a makeup brush to apply glue or adhesive to your hairline. Instead of glue, you can use a wig tape.

8. Gently put on your wig until the edges align with your hairline.

9. Part and make the hairline natural.

10. Style and use accessories as desired.

To apply your wig like a stylist, you need the following products and tools:

? Human hair wig? Fine toothed comb? Scissors or pinking shears? Scalp protector? Flatirons or curling wands? Liquid adhesive, wig tape or glue? Adhesive application brush? Hair clips and bobby pins? Blow dryer? Wig cap

Step 1- Prepare your wig

Your wig needs to be well prepared before you put in. The preparation of your wig involves different processes depending on if the wig is new or old.

Wash and condition your wigwash human hair lace wig before wearing

You should occasionally wash and condition your old wigs or take them to a stylist for proper care and styling. If your wig is in good condition or new, you do not need to wash or condition until you have used it a few times.

Tips? Human hair wigs do not have a natural source of oil or moisture. Therefore, always insist on sulfate-free shampoos for washing your wigs to avoid damage.? If you wear your wig very often, then you should wash them at least once or twice a month.

Test fit your wigtest fit your human hair lace wig

Put on your wig to ensure it fits properly then brush it out. New wigs especially need to be brushed before you put them on to remove any shape that has been imposed on the wig by the wig box. Brushing your wig will also help the hair fall into place and remove tangles.

If you are preparing a long wig, pack it into a ponytail.

For short wigs, use bobby pins to hold the hair on the edges of the wig backward.

The purpose of packing your wig is to ensure that the edges do not get caught inthe glue or adhesive when you put it on.

Trim the extra lace on the edgesHow to trim wig lace off

If you are wearing a front or full lace wig that hasn’t already been trimmed by the manufacturer, you will have to trim the lace. Wear the wig and adjust it as you want, then use a few clasps to pull the hair away from your face.

Take sharp pinking shears or scissors and trim the extra lace carefully along your hairline. When trimming, leave a little space past the wig hairline about one- eight-inch of lace.

Tip? Trimming the lace edge is only applicable if you are preparing your wig for the first time, and it hasn’t been trimmed already.? Be careful when trimming to avoid cutting into the hairline of the wig.? When you finish trimming, place your wig aside on a wig stand or a flat surface.

Step 2 – Prepare your hair

Before applying your wig, you should prepare your hair by flattening it. Flattening your hair prevents the appearance of bumps in your wig, making it look unnatural. The length of your hair will affect the way you prepare it for wig application.

Preparing your long hair for wig applicationprepare long hair for wig application

Pack hair into a ponytail and wrap it into a flat bun. Then use bobby pins to hold the bun down.

Preparing medium or short hair for wig applicationprepare medium hair for wig application

There are two ways to flatten your short or medium hair for wig allocation. First is to braid hair into cornrows. Straight and backward cornrows are most suitable. Another black man wig option is to mold the hair flat into your head using gel or hairspray.

Put on the wig caphow to put on wig cap

There are different types of wig caps. However, a soft wig cap is best for use.

when you have a human hair wig. The primary purpose of putting your wig cap on is to help hold down and put the wig in place properly.

A wig cap also helps flatten your hair better and keeps it all tucked under the wig.When putting on a wig cap, make sure that your fingers do not scatter your already flattened hair. Then, leave some part of your hairline (about one inch) uncovered.

PS- If you have no hair, you shouldn’t bother about using wig caps. Wig caps will slide around your head if there is no hair and cause a knot under your wig.

Step 3- Protect your skinhow to clean hairline for wig application

Clean your hairline with soap and water, cleanser, or cotton wool dabbed with alcohol. This will help remove excess oil on the hair that may reduce the effectiveness of the glue and cause your wig to slide off your head.

how to appy a scalp protection serum

When the alcohol is dry, apply a scalp protection serum or spray and allow it to dry completely. It is crucial to clean and protect your scalp, especially the skin on your hairline, before putting on the wig. The scalp protector protects your skin against the harsh effect of the glue or wig tape.

Step 4 – Apply glue or wig tape to your hairline

For human hair wigs, you can either use a liquid adhesive a wig tape or glue. You should do a skin test before applying any glue on your scalp.

Test your skin

Some glues may cause allergy on your skin. When you buy a wig tape or liquid adhesive, carry out a skin test by dabbing a small quantity on your hand a day before you plan to apply your wig.

If you notice any form of reaction, you should avoid such glue and get a hypoallergenic adhesive instead.

However, if the skin on the back of your hand feels normal, then you can go ahead and use the glue on your hairline.

Applying a Wig tapehow to apply wig tape

Cut your wig tape into eight or ten pieces, enough to cover your hairline without spaces in between completely.

Press the sticky side of each tape against the skin of your hairline evenly.

Then remove the thick foam of the tape, leaving the other gummy part of the tape exposed.

If your wig tapes have too much space between them, you will have loose space between your hairline and your wig will look unnatural.

Using a liquid glue or adhesivehow to apply wig glue

You need a brush to apply liquid glue if you do not want to use the wig tape.

Use the brush to apply the glue onto the areas of your hairline where the wig will be attached.

Then, blow-dry for a few seconds until the glue becomes tacky and then apply your wig.

You do not need to blow dry if you use a hair bond adhesive, apply your wig immediately.

Step 5 – Put your wig on and secure itput wig on from the back of your head

Now, this is the trickiest part of applying the wig.

Hold your wig at the sides, moving your hand back towards the center. Carefully put the wig on from the back of your head.

With the wig is sitting on the back of your head, pull gently forward from the side while preventing the edges from sticking to the glue.

Using a mirror, adjust the edges of the wig to align with your hairline.

Then check that the back of the wig covers your hair completely. Adjust again until you have matched the edges of the wig with your hairline, and it’s well centered.

Then, press the lace of the wig around the edge over the glue or wig tape using a fine-tooth comb. Ensure that there is no glue residue wig tape visible.

Tips? Do not bend over while wearing your wig to avoid parts of the wig sticking to the glue.? Once you press the edges, the wig will hold, and you won’t be able to adjust anymore. Therefore, ensure that the wig is placed correctly before pressing it down at the edges.? You can hook a few body pins into the wig through to your wig cap to make your wig more secure.? Remove any visible glue residue by rubbing with a ball of cotton wool dabbed in alcohol.

Reapply your wig

It is possible that after wearing your wig, you find that it is not well-positioned, or it looks unnatural.

Get a Grip and dab in alcohol, then run it over your hairline to detach the wig. You can now apply the wig again.

Step 6 – Make the hairline and hair part naturalUse a flat iron to smooth down the top and the edges of your wig

Regular brushes are best for brushing natural hair wigs. Use a flat iron to smooth down the top and the edges of your wig for a natural look.

You may also part the hair on your wig at the center. For a natural hairline look, ensure that the middle of the wig aligns with the middle of your hair.

Other ways to make your hairline look natural is to ensure that edges fit correctly if your wig is not placed correctly, it will give it away easily.

You can also let a stylist trim the extra lace in the front of your wig. Irregular edges would be more obvious, giving you an unnatural look.

Step 7 – Style your hair and accessorize

The simplest tricks to making your human hair wig look natural are styling and accessorizing.

Style the hair up the same way you would style your natural hair and use accessories as you usually would. This will make your look naturally, and also make you comfortable.

Tip? To get a more natural look on a scanty hairline, place your wig about half an inch behind your hairline.? The wig hairline should be very similar to your natural hairline. If your hairline has long baby hairs, make sure that you pick a wig that has the same for a more natural look.Have you ever used human hair wig, or do you have any tricks that help your wig look natural? Share below whatever method you have applied that has helped your hair look more natural.

icon wigs bad wig images wig wag sign

您可能还喜欢...